You can use pathping for latency and connectivity testing.
C:\>pathping www.yahoo.com
over a maximum of 30 hops:
0 gateway.2wire.net [192.168.99.5]
1 home [192.168.35.254]
2 88-97-225-3.lightspeed.ltrkar.sbcglobal.net [88.97.225.3]
3 20.33.128.50
4 150.164.90.174
5 ppp-151-164-52-65.rcsntx.swbell.net [151.164.52.65]
6 asn10310-11-yahoo.eqdltx.sbcglobal.net [151.164.250.202]
7 ae-1-d100.msr1.mud.yahoo.com [216.115.104.97]
8 te-8-1.fab2-a-gdc.mud.yahoo.com [209.191.78.141]
9 te-8-1.bas-c2.mud.yahoo.com [68.142.193.7]
10 ir1.fp.vip.mud.yahoo.com [209.191.122.70]
Use the -n for no names.
C:\>pathping -n www.yahoo.com
Tracing route to any-fp.wa1.b.yahoo.com [209.191.122.70]
over a maximum of 30 hops:
0 192.168.99.5
1 192.168.35.254
2 88.97.225.3
3 20.33.128.50
4 150.164.90.174
5 151.164.52.65
6 151.164.250.202
7 216.115.104.97
8 209.191.78.159
9 68.142.193.7
10 209.191.122.70
Computing statistics for 250 seconds…
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 192.168.99.5
0/ 100 = 0% |
1 2ms 0/ 100 = 0% 0/ 100 = 0% 192.168.35.254
0/ 100 = 0% |
2 10ms 0/ 100 = 0% 0/ 100 = 0% 88.97.225.3
0/ 100 = 0% |
3 6ms 0/ 100 = 0% 0/ 100 = 0% 20.33.128.50
0/ 100 = 0% |
4 7ms 44/ 100 = 44% 44/ 100 = 44% 150.164.90.174
0/ 100 = 0% |
5 — 100/ 100 =100% 100/ 100 =100% 151.164.52.65
0/ 100 = 0% |
6 25ms 0/ 100 = 0% 0/ 100 = 0% 151.164.250.202
0/ 100 = 0% |
7 22ms 0/ 100 = 0% 0/ 100 = 0% 216.115.104.97
0/ 100 = 0% |
8 19ms 0/ 100 = 0% 0/ 100 = 0% 209.191.78.159
0/ 100 = 0% |
9 19ms 0/ 100 = 0% 0/ 100 = 0% 68.142.193.7
0/ 100 = 0% |
10 18ms 0/ 100 = 0% 0/ 100 = 0% 209.191.122.70